Tutorial How to Flash Firmware Samsung Galaxy A10 SM-A105G | Samsung Indonesia officially brought the Galaxy A10 to the homeland in March 2019 ago. The mobile phone that has the SM-A105G serial number when the first glide has been running Android Pie 9.0 which is wrapped by the One UI interface.
A few months after its launch, the Samsung Galaxy A10 software or firmware has been several times getting system updates. This update/update can be done by users with several methods, including updates via OTA or manual.
Updates via OTA in this case can be done easily, without the need to use any additional tools or materials, just go through the settings menu only. But this method has a lot of limitations and can only do system updates, bug fixes, performance improvements and light errors only.
While the update manual, which in this case flashing Stock ROM or Firmaware Galaxy A10 does need some tools as well as additional applications, but has many advantages of its own. What is it? Here’s the description.
Benefits of Flash Firmware
- Fix the damaged firmware.
- Downgrade or Upgrade OS.
- Fixed a system bug.
- Repair the phone that has the restart itself.
- Fix Bootloop (Stack in Logo).
- Resolve forgotten password or pattern lock.
- Can remove Root status.
- Solution for Softbrick.
- An insensitive screen solution.
- Fix a slow/hang smartphone.
- Fix Custom Binary Blocked By FRP Lock.
- Remove malware or viruses that are on your phone.
- And so on.
How to Flash Samsung A10 (SM-A105G)
Before starting the Flash process/installing the firmware into the phone, of course you have to prepare some necessary equipment or applications.
Preparation of tools and materials
- Samsung Galaxy A10 HP of course.
- The USB cable is Ori (original).
- A Windows-based computer, either a PC/Laptop.
- Download and Install Samsung USB Driver, restart the computer.
- Download and extract ODIN3_v3.13.1 file (no need to install) and save it in an easy-to-find place.
- Download the Firmware of Samsung A10 (SM-A105G XID) then the file extentic so that it becomes anextension. tar. MD5.
The process Flash Firmware Samsung A10 SM-A105G
Please use this tutorial only if you are convinced 100% of the risk of doing your phone flash. roseannbennett not responsible for any damage caused by the use of files and the guidelines on this website. Do With Your Own Risk (DWYOR)!
Step #1. The first step to take is to turn off your Samsung Galaxy A10 HP to the total Off position.
Step #2. Go to the downloading mode by pressing the “Volume up + Volume down + Power ” button at the same time about 3 to 5 seconds until the phone vibrates. When the Samsung boot logo is visible, release all three keys. After that press the button again “Volume up ” To enter the menu “Downloading Mode “.
Step #3. Next process please run the ODIN3_v3.13.1 application you have previously extracted the file. Run by right-clicking on the file then select Run as Administrator.
Step #4. Connect your phone to your computer using a USB cable. To make sure both are well connected, see the “Added ” message on the Log tab. If it does not exist, then try moving the USB cable to another port or replacing the USB cable.
Step #5. Next step, click on the tab “Options “. Tick (✓) “Auto Reboot ” and “F. Reset Time “. The rest just leave it (unchecked).
Step #6. Next step click the button “AP “, then select the Firmware/ROM file that you have donwload before. Remember, the file must have an extension. tar. MD5 (not. zip or. rar). After that click the Open button.
Step #7. Next, click the “Start” button to start the firmware installation process. Wait a few moments until the process finishes. For this process usually takes about 3 to 5 minutes.
Note: To see if the installation process of the ROM is successful or not, please look at the top left of ODIN application. If there is a “PASS! ” Text, the process is successful. But when the message “FAIL! ” means failed.
Some factors that sometimes cause failures are usually caused by USB not meeting or shake during the installation process of ROM and the ROM file is corrupted/not yet have extension. tar. MD5.
Step #8. Lastly, if the message in ODIN already shows “PASS ” which means it works, then the phone will automatically Restart. Well, at this stage you can already unplug the USB cable, then wait a few moments until the phone is perfectly lit and go to the main screen. Finished.
The process flashing Samsung A10 above, essentially the same by installing the firmware for all types of HP Samsung Galaxy. The difference is only in the selection of ROM file types and how to enter the downloading mode menu. The rest, nothing different.
Thus a full tutorial on how to Flashing a Samsung Galaxy A10 SM-A105G (XID) Firmware. Hopefully useful for those of you in need. Thank you for visiting and greeting.